The camera harness is made from needlepoint mesh which I cut some mesh to make openings for clips and carabiners. I used an iPhone 4 case to put the camera in to stabilize it since it has edges to keep the camera in place. I am using a Panasonic Lumix series digital camera. I used bungee cords to hold the iPhone case to the mesh and rubber bands (I have to improve on that, maybe use velcro) to hold phone to case. I used a camera strap for the top around the neck, and I used another camera strap for around my body. I also used some metal tape to reinforce the edges so the holes don't pull out. I got the needlepoint mesh at Jo-Ann's, the bungee cords at Target, I already had the case, carabiners, camera straps. This will allow me to make smooth videos, since handlebar mounts and tripod on stem mounts jiggle around too much. "No copyright is claimed in [content copied] and to the extent that material may appear to be infringed, I assert that such alleged infringement is permissible under fair use principles in US copyright laws. If you believe material has been used in an unauthorized manner, please contact the poster." |
From:
frespirt1002
Views:
1
0
ratings | |
Time: 00:24 | More in People & Blogs |
DIY Camera Mount Harness for Videos While Bicycle Riding
Subscribe to Applenews247.Com Newsletter